 |
| specifications: | |
|---|---|
| Quantity: | |
Product Description
Brand New Classic Slackline Walking Rope Of 15 Meters In Length /49 Feet X 5 Cm Width !!
Slack lining is the act of balancing along a narrow, flexible piece of webbing usually low to the ground.
Originating in the climbing world, it has become popular for balance training and now, is available to everyone.
No additional tools or rigging are needed; just the kit and a couple of trees and you're ready to go.
How to assemble:
1. Search for a suitable location to anchor the balance strap. To avoid damage to the material only tighten the balance strap around the trees with a 30 cm diameter (approx 1m circumference) and maximum of 1.70 m. If you use other anchoring solution. Make sure that they 7 can sustain loads of more than 1000 kg. To avoid damage trees , a rubber mat or piece of carpet, will help protect the bark. The same is true for concrete, stone or square posts where the balance strap can be protected through appropriate edge protection.
2. The untwisted strap should be wrapped no higher than 50 cm or better yet, the anchoring point should be one hand width below the users stepping height
3. form a noose by feeding the strap through the protected mounting loop. To ensure that the strap turn in the horizontal direction, simply fold the strap through the noose.
4. As with the long strap, strap the untwisted ratchet strap around the anchoring point at a level no higher than 50 cm or one hand width below the users stepping height. Feed the ratchet through the loop and create a noose.
Make sure that the ratchet does not hang too far away from the user area.
This will happen if the diameter of anchoring point in not large enough. In such cases, shorten the strap by wrapping it several times around the anchoring point.
Make sure that the strap lies horizontal. to operate it easily and securely.
Make sure that the ratchet's pull lever is down
